Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.
Back To Top
DeltaV™ 24 V DC Power CHARM
PDP_CHARM_DI_v1
A Power Characterization Module (CHARM) for a 24 V DC Power output.
DeltaV™ 24 V DC Power CHARM

Specs

Device Type
24 V DC Power output
Status Read Back Level for Power Good
> 10 V DC
Status Read Back Level for Power Bad
< 5 V DC
Isolation
Status read back circuitry is optically isolated and factory tested to 1000 V DC. Output power has no isolation from the injection point.
Field Circuit Protection
2 Amp fuse located in Fused-Injected-Power Terminal Block, Field wiring disconnect
CHARM Power Req
12 mA max @ 24 V DC
Injected Power Req
1.01 Amps max @ 24 V DC
CHARM Heat Dissipation
0.32 W

Features

  • Eliminate marshalling and add I/O anywhere in the plant without affecting control room cabinets
  • No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures
  • No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures