Firewall configuration is supported using the built-in browser-based interface. Configuration access allowed only from the secure side of the firewall.
2x copper, 1 DeltaV workstation (internal) port, 1 external LAN port. 10/100 MB auto-negotiating network speed supported. IPv4 only.
1 USB 2.0 rear facing for configuration storage only, used to facilitate replacement of firewall. Configuration is pulled from the USB drive on power up of the firewall.
1 RS232 (recover admin password and IP address only, no configuration access through the serial port). No command line configuration support. Serial cable not include with product.
Front panel - TTL output normally HIGH (+5VDC), goes to LOW state if one or both power cords are unplugged or if there is an internal predefined fault
Front Panel LEDs
1- Green Power LED. 1- Red power supply fault LED. 2- Front panel LAN ports with Link Status and Activity LEDs.
Redundant power connections. US power cables included with firewall. Rear access not required during operation. USB port (populated from factory) contains nano USB drive to hold configuration for easy replacement of the firewall.
Dimensions and Weight
43.18 x 477.52 x 249.94 [mm] (1.7 x 18.8 x 9.84 [in]) HxWxD - 3.18 Kg (7 lb)
Redundant power inputs. Input voltage: 85-264 / 50-60Hz. Power cords supplied with the unit. 77 BTU/h
0 to 40° C (32 to 104° F) - fanless design